Tekst źródłowy strony Użytkownik:KathyCarley543

Learning how to construct your own COMPUTER from scratch can be quite a very difficult task if you know nothing about personal computers. However once you learn how to do it and also understand exactly how to handle it, it actually turns into quite enjoyable having the capacity to easily strip down and develop old or brand new PC's. I would like to take this chance to lay out the essential components of your personal computer and help you figure out how to build a personal computer from scratch.

PC Components

The most frequent pc components that you will have to have are your mouse, keyboard, hard drive, floppy drive, ram chips, sound and visuals card, power supply, motherboard and keep an eye on. I'm assuming you will know what each one of these components look like. If you tend to be unsure about some components just hunt for pictures of them on the web and you will dsicover what they are.

Connection Process

Firstly you have to utilize the mother board and also the mother board growing plate. Firstly, gently screw your motherboard onto mom board plate with all the notches or screws which have been provided with the package or system. Once this is done you will need to insert the PROCESSOR (Central Control Unit) directly into its slot for the motherboard. Sometimes these CPU sockets have levers which you need to gently release for you to open it up so become aware of that. Gently slide your CPU into its socket making sure the pins around the backside slide in correctly otherwise it may get damaged. You can currently clip the lever back in place and make sure it is protected.

Now you must attach the heatsink on the CPU chip. You might realize that the CPU already incorporates the heatsink/fan mounted on it in which case you can read additional. Now you should connect the small cable from your heatsink fan for the corresponding socket around the motherboard to provide it power.

The next step would be to place the ram chips to their respective slots which can be long and skinny. Once this continues to be done you may well mount the motherboard growing plate onto the side of the personal computer and screw/slip it in in order that it is attached properly.

The power supply may be the next component to deal with. The power supply area is generally located behind the pc case and it is indicated with screw holes which are unoccupied. Just try and also maneuver it around to adjust to with the corresponding holes before you decide to screw it within. The power supply has a main system connection which gets plugged into the power slot on the motherboard, a floppy energy connector which gets attached to the floppy drive and a few standard peripheral power connectors (crimson, yellow and dark wires) which get connected to your hard drives and cd roms. You will need to mount the hard disks, cd roms and also floppy drives and connect them along with those connectors being sure that the red cable on each electrical power connector is pointed inwards towards the motherboard. I'll explain precisely why below.

Right, now we move onto the 2 ports on the actual motherboard called the primary and secondary IDE Slots. You will notice them when they are rectangular together with brackets around them. these ports are widely-used to connect the hard drives and cd roms. The cables that get attached to these two plug-ins are 40 pin IDE cables along with have 3 internet connections on each cable. Make sure the longest area of the cable is attached to the IDE locations. You need to connect the primary IDE cable from the motherboard to your hard drive(s) as well as the secondary IDE port is utilized to connect your DVD Roms in your motherboard. When you select these IDE cables into the cdroms and hard drives make sure that the red insert strip is hand and hand with the red-colored wire strip with the power connectors that are connected to those devices. Consult your manual if you have one to see how to use the different jumpers to modify between master as well as salve drives in each port. This will allow you to choose which devices are primary along with secondary.

Now that the power supply is associated with the motherboard plus the various other components you will have to plug graphics as well as sound card within their slots. Once this is done be sure you connect the top panel connectors for the corresponding LED lights so your lights will arrive when the laptop or computer boots. Failure to do so will result in non function of the system.

Lastly make positive everything is connected properly. This includes the external mouse, keyboard, monitor cable and power cables so your computer will first turn on and function effectively. If all is completed well then it should be okay.[http://kelvinreviews.bloghi.com/2012/04/30/tips-to-setup-your-own-computer-system.html building a computer]